株式会社キャステック  Agent of KODERA ELECTRONICS Co., Ltd.
会社案内 商品情報 お問い合わせ English page
キャスティングC385A
前のページに戻る 自動両端端子圧着機ページへ 自動片端端子圧着機ページへ キャスティングページへ
キャスティングC385A キャスティングC385A_本体

 POWERFUL AND SMOOTH !
  FOR PRODUCTIVITY UP !
  BELT FEED HAS EVOLVED THE CASTING.

Casting C385A doesn't damage the core wire since stripping is performed with special round blade and cutting of the wire is processed with v-blade all together.
Belt feed system has actualized the flexible process.
Because it can grasp the face of the cable whose surface is unless, which is covered by coating material and is tender.

CASTING C385A
BELT FEED SYSTEM HAS ACTUALIZED HIGH POWER. FRONT STRIPPING UNIT CAN MOVE FREELY.
ベルトローラーがハイパワーを実現 先端ストリップユニットの移動が可能
Compared to before roller system, it can hold wire wider and send them powerfully.
Furthermore, it shows power for supply of CABTIRE cables whose surface is un-level, or shield wires etc.
You can change the position of front stripping unit.
If you set it near to front belt feed, it will dissolve the stretching coating of wire, which often occur when stripping front side.

 SPECIFICATIONS
MODEL CASTING C385A
CUTTING LENGTH 210〜99,999mm
CUTTING TOLERANCES ±(0.1+0.0005×L)mm
 L=Indicate a cutting length
STRIPPING LENGTH FRONT END  Maximum length 1,500mm
(Semi-stripping is necessary)
REAR END  Maximum length    210mm 
(Semi-stripping is necessary)
APPLICABLE WIRE SIZE AWG#7(10sq)〜#28(0.08sq)(Depending on the wire type)
Biggest outer diameter :φ11mm
APPLICABLE WIRE TYPE ABS Wire, Air back wire, Shield cables, VSF, IV, KV, UL, Teflon, Glass Wire etc.
WIRE FEED SPEED Variable
CUTTER MATERIAL Ultra fine particle alloy
OUTER DIMENSION W716mm×D430mm×H266mm
WEIGHT 44kg
POWER SUPPLY AC100V〜AC240V(Single phase) 50/60Hz
POWER CONSUMPTION Rated : 50W Max : 350W
AIR SUPPLY 0.06Nl/min 0.5MPa 
(Use clean, dry air)

 PROCESSING CAPACITY (NUMBER OF PROCESSED WIRES PER HOUR)

TOTAL LENGTH [LONG STRIPPING LENGTH]
Pieces
[SHORT STRIPPING LENGTH]
Pieces
500 mm - 2,022 
700 mm 891  -
1000 mm 769  1,263 
1500 mm 628  918 
2000 mm 530  726 
2500 mm 458  598 
3000 mm  405  507 
4000 mm 327  -
PROCESS CONDITION Both ends stripping  : 100mm
Semi stripping  : 50mm
Setting speed : 9
ON Time  : 0.1 Sec
OFF Time  : 0.1 Sec
Both ends stripping : 60mm
Semi stripping  : 30mm
Setting speed : 9
ON Time  : 0.1 Sec
OFF Time  : 0.1 Sec

Copyright(C)2008,Castec Co., Ltd. All Right Reserved