株式会社キャステック  Agent of KODERA ELECTRONICS Co., Ltd.
会社案内 商品情報 お問い合わせ English page
高速自動端子圧着機C511
前のページに戻る 自動両端端子圧着機ページへ 自動片端端子圧着機ページへ キャスティングページへ
高速自動端子圧着機C511 高速自動端子圧着機C511

REASONABLE AND HIGH PERFORMANCE MACHINE WHICH HAS INHERITED THE PERFORMANCE OF CASTUGNON C551

This machine is inherited the performance of CASTUGNON C551 and has achieved ultimate cost performance.
It includes "Digital Crimper" and "Crimp Force Monitor" as standard equipment.
CASTUGNON C511 is main machine of C51X series.
High basic performance is same as C551S.
Lineup of C51X series
高速自動端子圧着機C511 C511 has achieved ultimate cost performance.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C511
高速自動端子圧着機C5113t C511 3t is installed 3 metric ton press.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C5113t
高速自動端子圧着機C515 C515 is installed single seal unit.
It has developed for cost performance machine of C555S.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C515
高速自動端子圧着機C518 C518 is installed seal unit at both front side and rear side.
It has developed for cost performance machine of C558S.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C518
List of function comparisons Optional List

DEVELOPED SEAL SUPPLIER
It is the high performance supplier which seals easy and speedy.
This seal is indispensable for automobile harness fields.
This supplier is equipped for C515, C518.
DF-1 防水ゴムサプライヤー
DF-1 防水ゴムサプライヤー Seal chuck can be easily changed by one-touch coupler.
防水チャック
As the seal is sorted to the correct direction with newly developed disk, more speedy supply has realized.
It is possible to supply to the last seal by the sensor.
It is no need to adjust the vibration which used to be done for straight feeder.
The unit can be easily changed by one-touch operation.
We recommended the combination use with 「OR-01」, oil removal unit for the seal.
Carry pin can be changed by single screw.
キャリーピン

 EASY-TO-OPERATE OPERATION PANEL
操作性のよい操作パネル Operation panel which is placed at front of machine is good in visibility.
The operator can easily do all kind of setting.
 CRIMP FORCE MONITOR FOR STANDARD.
It is "Crimp Force Monitor Display Panel" which is set in digital crimper.
It has high sensitivity so that it can detect crimping failure.
For example, if a core wire cut, core wires come out, terminal failure, sheath is too long.
Moreover, it watches other fault occurrences.
クリンプフォースモニタ表示パネル
 OTHER CHARACTERISTICS
No idling before processing.
Utilizing stepping motors in major drive mechanisms, the machine eliminates idling almost completely.
Measurement correction for improved accuracy.
Sometimes the processed length can be shorter than the displayed length, due to back tension and other factors.
To correct these problems, this model includes a measurement correction feature to ensure accuracy.
High-precision crimping press installed.
KODERA developed a highly accurate crimping machine.
It makes it possible to improve crimping quality with a crimp force monitor.
Crimping of flag-shaped terminal.
Allows switching from the standard terminal processing to the flag-shaped terminal processing with ten key.
Setting process with memory data search.
Specify the job number in memory storage to recall the wire data.
Easy to set-up change.
You can easily retool parts.
When you exchange parts, you just need single screw.
Adjustment of front / rear cutter settings.
You can set the front and rear blade differently.
This is ideal when processing special type of wire, such as glass wire.
Applicator from any manufacture can be used.
Using the attachment base of each manufacture, you can attach and detach any type of applicator.
 MACHINE SPECIFICATIONS
MODEL C511/C5113t C515 C518
FRONT SETTABLE VALUE 0.1〜30mm
REAR SETTABLE VALUE 0.1〜20mm
MINIMUM PROCESSING LENGTH 44mm〜
※When crimping both ends, the size is from one side wire front to another side wire neck bottom.
44mm〜
※When crimping both ends, the size is from one side wire front to another side seal neck bottom.
MAXIMUM CUTTING LENGTH 99,999mm (About 100m)
CUTTING TOLERANCE ±(0.2+0.002×L)mm L=Cutting length
APPLICABLE WIRE SIZE AWG#12〜AWG#32 (Depend on the wire type)
APPLICABLE WIRE TYPE AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon, Glass wire, etc.
CRIMPER TERMINALS Open barrel chain terminals (Side feed, End feed)
CRIMPER CAPACITY 2.5ton (C5113t's is 3ton)
OUTER DIMENSION W1090mm×D720mm×H1,365mm
WEIGHT 450kg 480kg 610kg
POWER SUPPLY Single phaseAC200V、AC220V、AC240V 50/60Hz
AIR SUPPLY
(USE CLEAN DRY AIR ONLY)
25NL/min 0.5MPa 35NL/min 0.5MPa 45NL/min 0.5MPa
POWER CONSUMPTION During rest : 340W
At maximum : 1,600W
During rest : 400W
At maximum : 1,750W
During rest : 450W
At maximum : 1,900W
 PROCESSING CAPACITY (NUMBER OF PROCESSED WIRES PER HOUR)
TOTAL LENGTH      
100mm 5,540 2,780 2,400
200mm 5,500 2,780 2,400
300mm 5,460 2,780 2,400
500mm 5,100 2,780 2,400
1,000mm 3,850 2,780 2,300
2,000mm 3,150 2,300 1,950
5,000mm 1,800 1,500 1,350
PROCESSING CONDITION Wire : 0.5sq(AWG#20)
Front / Rear side : Stripping 4.5mm
Wire : 0.5sq(AWG#20)
Front / Rear side :Stripping 4.5mm
Sealed Value : 20mm
top

Copyright(C)2008,Castec Co., Ltd All Right Reserved