株式会社キャステック  Agent of KODERA ELECTRONICS Co., Ltd.
会社案内 商品情報 お問い合わせ English page
超高速自動端子圧着機C531
前のページに戻る 自動両端端子圧着機ページへ 自動片端端子圧着機ページへ キャスティングページへ
超高速自動端子圧着機C531 超高速自動端子圧着機C531_本体

NEW DESIGN MACHINE WHICH BOASTS HIGH-SPEED, HIGH QUALITY AND ENHANCED PERFORMANCE

The quality of the products constantly keep up top levels, thanks to, added to amazing processing speed such as 12,000 pieces per hour (0.3sec per piece), "CROSS ROLLER UNIT" which eliminate the winding fixture and "CRIMP FORCE MONITOR" which controls the quality of the product one by one as standard equipment.
Tooling changing operation is completed easily and quickly, thanks to compact and lightweight "HX Applicator" with built-in ID tag.
It contributes drastic cut down of the running cost by power consumption saving, air consumption saving, and extrem price-reduction of the crimper and the anvil.
It is valueavle and happy machine for users. 

ULTRA HIGH SPEED FULL AUTOMATIC END CRIMPING UNIT 
CASTUGNON C531
ULTRA HIGH SPEED PROCESSING
12,000 pieces per hour has been bought into reality.
TOOLING CHANGE TIME IS CUT DOWN
Simplified reel change and one-touch operation with built in ID tag and compact and lightweight "HX Applicator".
No need for adjustment.
THE SHORTEST PROCESSING LENGTH OF 29mm HAS COME TRUE
 Short wire processing, which both crimper are not good at, has come to realization.
※ See the picture (L). It depends on the type of terminals and wires. 
NO WINDING FIXTURE AND HIGH QUALITY FINISHING OF THE PRODUCT
Adopting the newly developed "CROSS ROLLER UNIT", high quality product with no winding fixture is created.
RELIABLE QUALITY CONTROL
"CRIMP FORCE MONITOR" which controls the quality of the product one by one is included as standard equipment.
EFFICIENT USE OF SPACE
Space-saving compact design.
CUT DOWN OF THE RUNNING COST
Power consumption saving, air consumption saving and extreme price-reduction of the crimper and the anvil.
WORKER-FRIENDLY AND EASY TO HANDLE視Excellent visible and high sensitive LCD touch panel display is adopped. BEAUTIFICATION OF YOUR FACTORY (WORK AREA)
Innovative design form and selectable colored covers.
 CRIMP FORCE MONITOR FOR STANDARD.
This is crimp force monitor display panel which is set in digital crimper.
It has high sensitivity so that it can detect crimping failure.
For example, if a core wire cut, core wires come out, terminal failure, sheath is too long.
Moreover, it watches other fault occurrences.
 MACHINE SPECIFICATIONS
STRIPPING LENGTH
(FRONT/REAR)
0.1〜7.0mm
MINIMUM PROCESSING LENGTH 29mm 〜
※When crimping both end, "L" is the size prom one side wire front to another side wire neck bottom.


MAXIMUM CUTTING LENGTH 99,999mm(About 100m)
CUTTING TOLERANCE ±(0.1+0.0005×L)mm L=Cutting Length
APPLICABLE WIRE SIZE AWG#18〜AWG#32(Depending on the wire type)
Please inquire about AWG#16 or less and more than AWG#34.
APPLICABLE WIRE TYPE AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon, Glass wire, etc.
CRIMPER TERMINAL Open barrel chain terminals (Side feed)
Front : Max Length 22o/Rear : Max Length 16o
CRIMPER CAPACITY Standard 700Kg
CONTROL METHOD Digital cam-driven
OUTER DIMENSION W520mm×D540mm×H1,550mm
WEIGHT 125kg
POWER SUPPLY Single Phase AC100V〜240V(Free) 50/60Hz
AIR SUPPLY 16NL/min 0.5MPa(Use clean and dry air only)
POWER CONSUMPTION During rest : 220W / At Maximum : 775W (300mm Processing)
 APPLICATORS SPECIFICATION
CRIMPER SIDE OUTER
DIMENSION
W27mm×D23mm×H79mm
\ 150g
ID
INFORMATION
1. Terminal information (model number / manufacture)
2. Wire Type
3. Core Diameter
4. Crimp Height
5. Crimp Force
6. Appropriate stripping length
7. Crimp position data
8. Shot number (Max 8 digits)
9. Trip shot number
10. Administrator (Or Owner)
11. Control Lot No.
DIES SIDE OUTER
DIMENSION
W39mm×D30mm×H57mm
WEIGHT 145g
ID
INFORMATION
1. Terminal information (model number / manufacture)
2. Shot number (Max 8 digits)
3. Trip shot number (Max 7 digits)
4. Administrator (Or Owner)
5. Control Lot No.
 PROCESSING CAPACITY (NUMBER OF PROCESSED WIRES PER HOUR)
TOTAL LENGTH PIECES
50mm 12,000 
70mm 12,000
100mm 11,800
200mm 10,900
300mm 10,200
500mm 9,000
PROCESSING CONDITION Wire type : UL1571  AWG#30
Terminal (Both end) : DF57-2830SCF
Setting : Speed / Normal 
With CPD-06

 

top

Copyright(C)2008,Castec Co., Ltd All Right Reserved