株式会社キャステック  Agent of KODERA ELECTRONICS Co., Ltd.
会社案内 商品情報 お問い合わせ English page
 
前のページに戻る 全自動両端圧着機ページへ 全自動片端圧着機ページへ カット&ストリップページへ

 THE PROCESS OF STRIP, CRIMP, TWIST and SOLDER TAKES AT 9,000 pieces/hour.

Based on C551HX whose strong point is super fast processing, in order to perform the process of twisting and soldering more speedily, the twisting blade is put in the cutter block and also the compactification of the operation of changing a wire is made extreme.
Flux treatment adopted the pouring method has realized the processing of "9,000 pieces/hour" .

<Processing condition>
  * Wire : KV0.3sq
  * Total length : 100mm
  * Front side : Crimp "AMCT2"
  * Rear side : Twist 5mm and solder all

* The Pouring Method
It is the method of circulating "Flux" constantly pouring down and applying to the wire.
Because extremely avoiding to evaporate flux, there is not waste and it is good in economy.
   The twisting Blade (K-Blade)                   Flux treatment of  the pouring method
 THE NEW IDEA OF THE STAND-ALONE SOLDERING UNIT HAS NEWLY DEVELOPED.

The soldering unit which is developed to pursue the neater finish is made independent from HX main body to extremely reduce the oxidation by the vibration of the fluid level which is caused by vibration during the crimping etc.
It has enabled reducing of the extra preparation time for swivel.
 PURSUING THE PROCESSING OF SHORTER LENGTH WIRE.

By means of moving the setting position of the cutting blade in the cutter block, shorter lead processing has been realized. (Minimum 19mm)
Handing the thin and short leads which are mainly used for the compact electronic devices has been enabled.
 THE SOLDERING BATH WHICH IS MADE WITH CARVED TITANIUM HAS BEEN REALIZED PERFECT LEAD-OFF.

The perfect titanium soldering bath has been adopted in order to meet the high melting temperature of lead-free bath.
Without the fear of eating away, always equable soldering is promised.
And the preparation time (from turning on the power to the beginning of operation) is only 10 minutes thanks to the beat efficiently in the bath is the best.
 EVERYONE CAN OPERATE EASILY.

The unit integrates 5.7 inch full color LCD touch panel which is interactive data entry and has crimp force monitoring system and also the screen can be changed to English, Traditional Chinese, Simplified Chinese and Korea including Japanese with a single touch.

 MACHINE SPECIFICATIONS
FRONT SETTABLE VALUE 0.1〜20mm
REAR SETTABLE VALUE 0.1〜9.9mm
MINIMUM PROCESSING LENGTH 60mm 〜
※When Crimping both ends, the size is from one side wire front to another side wire neck bottom.
MAXIMUM CUTTING LENGTH 99,999mm (About 100m)
CUTTING TOLERANCE ±(0.2+0.002×L)mm L= Cutting length
APPLICABLE WIRE SIZE AWG#18〜AWG#32 (Depend on the wire type)
Please inquire about AWG#16 or less and more than AWG#34.
APPLICABLE WIRE TYPE AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon, Glass wires and etc.
CRIMPER TERMINALS Open barrel chain terminals (Side feed)
CRIMPER CAPACITY Standard 1.2ton / MAXIMUM 2.5ton
CONTROL METHOD Digital method
OUTER DIMENSION W700mm×D550mm×H1,210mm
WEIGHT 190kg (With mini conveyer)
POWER SUPPLY Single phase AC100V〜240V(Free) 50/60Hz
AIR SUPPLY 18NL/min 0.5MPa (Use clean and dry air only)
POWER CONSUMPTION During rest : 120W / At Maximum : 850W
 APPLICATOR SPECIFICATIONS
CRIMPER SIDE OUTER DIMENSION W27mm×D23mm×H79mm
WEIGHT 150g
ID INFORMATION 1. Terminal information (Model number / Manufacture)
2. Wire type
3. Core Diameter
4. Crimp height
5. Crimp force
6. Appropriate stripping length
7. Crimp position data
8. Shot number (Max 8 digits)
9. Trip shot number 
10. Administrator (or owner)
11. Control lot no.
DIES SIDE OUTER DIMENSION W39mm×D30mm×H57mm
WEIGHT 145g
ID INFORMATION 1. Terminal information (Model number / manufacture)
2. shot number (Max 8 digits)
3. Trip shot number 
4. Administrator (or owner)
5. Control lot no.
Optional terminal location sensor integrated ID-tag, wireless RF approx, 100kHz data send / receive device.
 PROCESSING CAPACITY
TOTAL LENGTH PIECES
75mm 10,600
100mm 10,400
300mm 8,950
500mm 7,850
1,000mm 5,350
2,000mm 4,100
PROCESSING CONDITION Wire : UL1061 AWG#26
Terminal :0-0179227-1 (CT2)
Setting  : Speed /Fast

Copyright(C)2008,Castec Co., Ltd All Right Reserved