株式会社キャステック  Agent of KODERA ELECTRONICS Co., Ltd.
会社案内 商品情報 お問い合わせ English page
自動端子圧着機C550SZ
前のページに戻る 自動両端端子圧着機ページへ 自動片端端子圧着機ページへ キャスティングページへ
自動端子圧着機C550SZ 自動端子圧着機C550SZ

 OPTIONAL PARTS FOR MORE FUNCTIONALITY!
  THIS IS HIGH TRUSTABILITY AND
             HIGH PERFORMANCE MACHINE.

You can select the C550SZ basic model or any of the other model in accordance with your processing requirements and future job expansion.
But a simple design and a compact body, it offers a high crimping performance of 2.5 ton.
Those machine install an automatic crimp force setting function and crimp force monitor which displays condition of crimping terminal in a graphic form on an LCD screen.
Such as an interactive all screen LCD touch panel, you will be convinced that C550SZ series are revolutions.

AUTOMATIC END CRIMPING UNIT
CASTUGNON C550SZ
Lineup of C550Z series
自動端子圧着機C550SZ C550SZ shows the ability only by Super CASTUGNON.
Basic machine of full automatic single end crimp unit.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C550SZ
自動端子圧着機C550SZT Combined with the automatic wire twisting unit (CASY-645) to basic machine.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C550SZT
自動端子圧着機C550SZS Combined with the soldering unit (SUA) to basic machine.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C550SZS
自動端子圧着機C550SZTS Combined with the automatic wire twisting unit (CASY-645) and the soldering unit (SUA) to basic machine.
AUTOMATIC END CRIMPING UNIT
CASTUGNON C550SZTS
List of function comparisons Optional List

「SUV」 SOLDERING UNIT
It is installed to "C550SZS" and "C550SZTS" as standard equipment.
SUV(ハンダ装置) デジタル温度パネル
EXPERT TECHNIQUE WITH ONE-TOUCH ADJUSTMENT
The dipping speed, the depth of soldering, the soldering time, the removal time can all be individually adjusted with one-touch adjustment depending on the size of the wire and amount of soldering.
DIGITAL TEMPERATURE PANEL
It can be accurately maintained.
フラックス装置 光センサーによる液面管理
SPLASH FREE FLUX MECHANISM
There are two roller (upper and lower) which rotate in sync with a wire a when it passes between them.
This reduces the splashing of flux.
You can adjust the amount of flux to meet your requirements.
CONTROL THE LIQUID SURFACE EXACTLY WITH THE LIGHT SENSOR.
It senses the liquid surface of soldering bath exactly and supplies as much amount of solder as necessary.
NEW MECHANISM, WHICH ENSURES HIGH QUALITY AND HIGH ECONOMY.
By integrating a filter plate in the rotating bath to remove impurity, which float due to its light specific gravity, the newly designed stand-still solder bath (CS-055) enables soldering with a smooth surface all the time.
In addition, since only a required amount of solder is fed from the reel, it is good in economy.
ハンダ装置の新機構

 EASY-TO-OPERATE OPERATION PANEL
美しい10.4インチ液晶タッチパネル 操作パネルは自由に位置設定可能
Because the arms swivels itself 180 degrees and the control panel 180 degrees, the operator can adjust the position of the panel freely for his standing position.
This will aid in reducing mistakes during an input operation..
8カ国語で表示可能な操作メニュー We adopted the beautiful and large full color LCD touch panel.
10.4 inch size, 1,677 million full-color touch panel.
The interactive picture panel is available for Japanese, and eight other languages.
 CRIMP FORCE MONITOR FOR STANDARD.
It has high sensitivity so that is can detect crimping failure.
For example, if a core wire cut, core wires come out, terminal failure, sheath is too long.
Moreover, it watches other fault occurrences.
If shows pressure power as crimping terminal in a graphic on the operation panel.
It doesn't only manage numerical values as you can also see the graphics.
1本毎に表示可能な波形モニタ
 OTHER CHARACTERISTIC
No idling before processing.
Utilizing stepping motors in major drive mechanisms, the machine eliminates idling almost completely.
Measurement correction for improved accuracy.
Sometimes the processed length can be shorter than the displayed length, due to back tension and other factors.
To correct these problems, this model includes a measurement correction feature to ensure accuracy.
High-precision crimping press installed.
KODERA developed a highly accurate crimping machine.
It makes it possible to improve crimping quality with a crimp force monitor.
Crimping of flag-shaped terminal.
Allows switching from the standard terminal processing to the flag-shaped terminal processing with ten key.
Setting process with memory data search.
Specify the job number in memory storage to recall the wire data.
Easy to set-up change.
You can easily retool parts.
When you exchange parts, you just need single screw.
Adjustment of front / rear cutter settings.
Yu can set the front and rear blade differently.
This is ideal when processing special type of wire, such as glass wire.
Applicator from any manufacture can be used.
Using the attachment base of each manufacture, you can attach and detach any type of applicator.
Processing data record of every lead.
The processing data and log can put into USB memory.
The data can keep as product record and useful for quality control.
 MACHINE SPECIFICATIONS
MODEL C550SZ C550SZT C550SZS C550SZTS
FRONT SETTABLE VALUE 0.1〜30mm
REAR SETTABLE VALUE 0.1〜20mm
MINIMUM PROCESSING LENGTH 24mm〜
※The size is from one side wire front to another side wire neck bottom.
40mm〜
※The size is from one side wire front to another side wire neck bottom.
MAXIMUM CUTTING LENGTH 99,999mm (About 100m)
CUTTING TOLERANCE ±(0.2+0.002×L)mm L=Cutting length
APPLICABLE WIRE SIZE AWG#12〜AWG#32 (Depend on the wire type)
APPLICABLE WIRE TYPE AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon, Glass wire, etc.
CRIMPER TERMINALS Open barrel chain terminals (Side feed, End feed)
CRIMPER CAPACITY 2.5ton
OUTER DIMENSION W1210mm×D705mm×H1,365mm
WEIGHT 325kg 330kg 350kg 355kg
POWER SUPPLY Single phase AC200V、AC220V、AC240V 50/60Hz
AIR SUPPLY 
(USE CLEAN DRY AIR ONLY)
20NL/min 0.5MPa 45NL/min 0.5MPa
POWER CONSUMPTION During rest : 330W
At maximum : 1,250W
During rest : 380W
At maximum : 1,350W
During rest : 460W
At maximum : 1,570W
During rest : 510W
At maximum : 1,650W
 PROCESSING CAPACITY (NUMBER OF PROCESSED WIRES PER HOUR)
TOTAL LENGTH C550SZ / PIECES C550SZT / PIECES C550SZS / PIECES C550SZTS / PIECES
100mm 5,170 4,740 5,170 4,740
200mm 4,700 4,400 4,700 4,400
300mm 4,350 4,050 4,350 4,050
500mm 3,750 3,450 3,750 3,450
1,000mm 2,800 2,650 2,800 2,650
PROCESSING CONDITION Wire type : 0.5sq(AWG#20)
Front / rear end : stripping 4.5mm
Wire type : 0.5sq(AWG#20)
Front / rear end : stripping 4.5mm
Twist rate : 1
Wire type : 0.5sq(AWG#20)
Front / rear end : stripping 4.5mm
Soldering time : 0.1 Sec
Wire type : 0.5sq(AWG#20)
Front / rear end : stripping 4.5mm
Twist rate : 1
Soldering time : 0.1
Sec
top

Copyright(C)2008,Castec Co., Ltd All Right Reserved